I’ve been doing some preparatory work for new projects over the last few months already – in between other tasks – but I now finally have time to start getting into building mode. An I have a luxury problem: too many exciting project opportunities! Work has started on the following new scratch builds:
- A scale 1:4 Ventus 2C (4.5m): A few years ago I went to pick up a DG1000 fuselage that I purchased from a retiring pilot. In his workshop there was this really pretty fuselage, which he agreed to sell to me for a few Francs. When I showed the fuselage to colleagues on the club they got all excited: it’s a fuselage that was built by a colleague in our club almost 20 years ago, from moulds and plans that are still around. In fact there are also still a few built planes around. This summer my mate Georg did a full revision on his and stripped out the landing gear, with the result that he got a really wonderful and surprisingly performant 4.5m glider weighing less than 5kg. The plane fills a “gap” in my collection of gliders, in the sense that it’s easy to hand-start on days with little wind. I’ve decided to give this build priority for this winter. I’ve built the wing joiner, have the rudder and elevator parts ready to build. Together with Georg we also cut the foam for the wings.
- A scale 1:3.5 Diana 4 (5.14m): this one will be 2nd in my priority list, and I’ll be building part of it alongside the Ventus. More on that in a next post.
- A scale 1:3 Diana 2 (5m): The 5m Diana2 was the first Diana2 model built in our club and as far as I’m aware anywhere. It was a huge success within our club, but was quickly overshadowed by the smaller 4.28m, of which the Chocofly version has become famous as one of the best slope gliders around. I’ve been wanting to build the 5m version for ever. We still need to build a fuselage for myself and for Andi. I’ve yet to decide if I will fit it with my Baudis 5m Diana2 wings, or whether I’ll build my own set of wings. I built a wing joiner last week, but the rest of the plane will be for next winter.
- A scale 1:3.5 Monett Monerai (3.43m): My mate Richi has been planning to do a model of this US 12m kit glider for a while. It’s something very special. It’s also an easy build. Richi has done the plug for the fuselage pod (it’s a pod and boom glider) and is having the boom produced by colleagues in a professional glider manufacturer. I’ve produced the wing joiners for Richi and myself. I’ll work on this one on and off, depending on how other projects progress.
There may be one or two further surprises that I’ll report on as they appear :-)(I’m expecting something from the Ukraine, but the delivery of that is uncertain for understandable reasons) .
You must log in to post a comment.